《机构学与机械原理》(【Articles in Press】Mechanism.and.Machine.Theory（更新至Volume.44,.Issue.7.July.2009）)[压缩包]
中文名: 机构学与机械原理
英文名: 【Articles in Press】Mechanism.and.Machine.Theory（更新至Volume.44,.Issue.7.July.2009）
资源格式: 压缩包
发行时间: 1866年
地区: 英国
文字语言: 英文
简介:
《机构学与机械原理》
刊物介绍：
《Mechanism and Machine Theory》是国际机构与机器理论联合会会刊，可谓是国际一流学术期刊，机构学顶尖级的国际期刊，主要刊登机械动力学、齿轮与传动、人机系统与自动机、机械系统，以及计算机在机械设计中的应用等方面的研究论文。
作为国际机构与机器理论联合会的会刊，期刊的宗旨是促进机械科学的发展和交流机制的完善。
期刊的主题是：
•设计理论和方法;
•人机交互;
•机器人技术，机电一体化和微电机;
•机制，机械传动装置和设备;
•运动学，动力学，机械与控制系统;
•生物工程和分子化学应用；
注意，这里发布是【Articles in Press】，是指已经被确定接受的手稿，它不是最终的印刷稿，是先在网上让读者先看一下，然后根据读者的反馈再作调整。
P.S. 以前出版的期刊不考虑补齐，因为太多了，而且因为是AIP,08年以前的内容不全；不过我考虑补充部分。先共享2008
共享时段：19：00-24：00，其他不定，共享的资源长期有效。
建议使用软件MiniWinMount，这样就可以不解压压缩包，起到分流作用。
Affiliated as an Official IFToMM research journal - the International Federation for the Promotion of Mechanism and Machine Science
This international journal provides a medium of communication between engineers and scientists engaged in research and development within the fields of knowledge embraced by IFToMM, the International Federation for the Promotion of Mechanism and Machine Science.
The main topics are: •Design Theory and Methodology; •Haptics and Human-Machine-Interfaces; •Robotics, Mechatronics and Micro-Machines; •Mechanisms, Mechanical Transmissions and Machines; •Kinematics, Dynamics, and Control of Mechanical Systems;•Applications to Bioengineering and Molecular Chemistry.
Methodologically, this includes theoretical, experimental, and/or historical approaches, along with their practical application, including education. Substantially, the journal aims at covering all subjects related to mechanisms and machines in general, such as: design theory and methodology, kinematics of mechanisms, rotor dynamics, computational kinematics, multibody dynamics, dynamics of machinery, nonlinear vibrations, linkages and cams, gearing and transmissions, transportation machinery, control and reliability of mechanical systems, including hydraulic and pneumatic systems, experimental test techniques, robots and robotic technologies, mechatronics, micromachines, human-machine interfaces, haptics, among others. Prospective fields of application of mechanism and machine science to other scientific areas such as bioengineering and molecular chemistry are also welcome.
Contents:
Volume 44, Issue 1, Pages 1-288 (January 2009)
1.Editorial Board
2.Tensegrity frameworks: Dynamic analysis review and open problems
3.A review on belt and chain continuously variable transmissions (CVT): Dynamics and control
4.Kinematic and sensitivity analysis and optimization of planar rack-and-pinion steering linkages
5.Study on synthesis method of λ-formed 4-bar linkages approximating a straight
6.Optimization design of an explicitly defined rack for the generation of rotors for twin-screw compressors
7.A novel method for the singularity analysis of planar mechanisms with more than one degree of freedom
8.Some improvements on the exact kinematic synthesis of spherical 4R function generators
9.Isomorphism identification of graphs: Especially for the graphs of kinematic chains
10.Adjustable stiffness artificial tendons: Conceptual design and energetics study in bipedal walking robots
11.Kinematic and static analysis of a 3-PUPS spatial tensegrity mechanism
12.Pareto optimal synthesis of four-bar mechanisms for path generation
13.Computational efficient inverse dynamics of 6-DOF fully parallel manipulators by using the Lagrangian formalism
14.New performance indices for 6-dof UPS and 3-dof RPR parallel manipulators
15.Determining link parameters using genetic algorithm in mechanisms with joint clearance
16.On the optimum synthesis of a four-bar linkage using differential evolution and method of variable controlled deviations
17.On adjustable spherical four-bar motion generation for expanded prescribed positions
18.Introduction of control points in splines for synthesis of optimized cam motion program
19.Free vibrations analysis of a rotating shaft with nonlinearities in curvature and inertia
Volume 44, Issue 2, (February 2009)
1.Editorial Board
2.Study on the stiffness of a 5-DOF hybrid machine tool with actuation redundancy
3.Kinematic analysis and synthesis of an adjustable six-bar linkage
4.The mechanism theory and application of deployable structures based on SLE
5.Designing an underactuated mechanism for a 1 active DOF finger operation
6.The effects of dual row omnidirectional wheels on the kinematics of the Atlas spherical motion platform
7.Performance analysis and comprehensive index optimization of a new configuration of Stewart six-component force sensor
8.Forward and inverse analyses of smart compliant mechanisms for path generation
9.A twist exponential approach to gear generation with general spatial motions
10.Profile correction of a helical gear shaping cutter using the lengthwise-reciprocating grinding method
11.Kinematic and dynamic simulation of epicyclic gear trains
12.PAMINSA: A new family of partially decoupled parallel manipulators
13.Tolerance analysis of flexible kinematic mechanism using DLM method
14.On the solution of region-based planar four-bar motion generation
15.Beyond intelligent manufacturing: A new generation of flexible intelligent NC machines
16.Dimensional synthesis of a spatial 3-RPS parallel manipulator for a prescribed range of motion of spherical joints
17.Kinematic analysis of a serial–parallel machine tool: The VERNE machine
18.Synchronization and tension control of dual motor systems via MIMO discrete pseudo model following integral variable structure control
Volume 44, Issue 3, (March 2009)
1 Editorial Board
2 Preface: Why biomimetics?
3.A biologically inspired micro-vehicle capable of aerial and terrestrial locomotion
4.Refining the flute sound production of the Waseda flutist robot the mechanical design of the artificial organs involved during the flute playing
5.Robot gait synthesis using the scheme of human motions skills development
6.Bio-inspired design of electrically-driven bounding quadrupeds via parametric analysis
7.The use of compliant joints and elastic energy storage in bio-inspired legged robots
8.Snake-like locomotion: Experimentations with a biologically inspired wheel-less snake robot
9.Dolphin-like propulsive mechanism based on an adjustable Scotch yoke
10.Modelling and parametric study of modular undulating fin rays for fish robots
11.Biological inspirations, kinematics modeling, mechanism design and experiments on an undulating robotic fin inspired by Gymnarchus niloticus
Volume 44, Issue 4, (April 2009)
1. Editorial Board
2. Modeling and modification of the parallel plate variable MEMS capacitors considering deformation issue
3.Stigmergic cooperation of autonomous robots
4. On the placement of open-loop robotic manipulators for reachability
5.Computerized simulation of thread form grinding process
6.A novel method for multi-fault diagnosis of rotor system
7.Singularity analysis for six practicable 5-DoF fully-symmetrical parallel manipulators
8.General method for the synthesis of geared linkages with non-circular gears
9.Further analytical investigation into centrodes of the planar FBL: Symbolic representations, double points, tacnodes, degenerate forms
10.Optimized five-bar linkages with non-circular gears for exact path generation
11.Experimental model to control and monitor rotating machines
12.Contoured shaft and rotor dynamics
13.Local rub-impact fault diagnosis of the rotor systems based on EMD
14.Simultaneous estimation of the residual unbalance and bearing dynamic parameters from the experimental data in a rotor-bearing system
15.From transmission error measurement to pulley–belt slip determination in serpentine belt drives: Influence of tensioner and belt characteristics
16.Kinematics of pantograph masts
17.Dynamics and control of a planar 3-DOF parallel manipulator with actuation redundancy
18.Planar closed loop double chain linkages
19. Biologically based design of an actuator system for a knee–ankle–foot orthosis
Volume 44, Issue 5, (May 2009)
1.Editorial Board
2.Kinematic synthesis of cam-controlled planetary gear trains
3.Configuration synthesis of mechanisms with variable topologies
4.Kinematic design of a family of 6-DOF partially decoupled parallel manipulators
5.Influence of machine tool setting parameters on EHD lubrication in hypoid gears
6.Investigation of influence of load and velocity on scoring of addendum modified gear tooth profiles
7.On-line trajectory resolution for two-armed systems with conflicting performance criteria
8.Stiffness analysis of overconstrained parallel manipulators
9.Synthesis of adjustable function generation linkages using the optimal pivot adjustment
10.Dynamic performance comparison of the 8PSS redundant parallel manipulator and its non-redundant counterpart—the 6PSS parallel manipulator
11.On the new reversal effect in monolithic compliant bending mechanisms with fluid driven actuators
12.Mathematical model of a stepped triple circular-arc gear
13.Determination of the kinematically redundant active prismatic joint variable ranges of a planar parallel mechanism for singularity-free trajectories
14.Power requirement comparison in the 3-RPR planar parallel robot dynamics
15.Nonlinear dynamics of a two-stage gear system with mesh stiffness fluctuation, bearing flexibility and backlash
16.Wrench capability analysis of redundantly actuated spatial parallel manipulators
17.Compliant mechanism design for realizing of axial link translation
18.Message from the IFToMM President to the IFToMM community
19.IFToMM Newsletter 2008
20.Call for nomination for IFToMM Awards
Volume 44, Issue 6, (June 2009)
01.Editorial Board
02.Obituary: Jack Phillips
03.Statistical tolerance synthesis with correlated variables
04.Impact of geometrical defects on bearing assemblies with integrated raceways in aeronautical gearboxes
05.Kinematic flowrate characteristics of external spur gear pumps using an exact closed solution
06.Shape optimization for path synthesis of crank-rocker mechanisms using a wavelet-based neural network
07.Design of cam-type transfer unit assisted with conjugate cam and torque control cam
08.Kinetostatic modeling of 3-RRR compliant micro-motion stages with flexure hinges
09.A continuous model approach for cross-coupled bending vibrations of a rotor-bearing system with a transverse breathing crack
10.Design of Geneva mechanisms with curved slots for non-undercutting manufacturing
11.On the joint velocity jump during fault tolerant operations for manipulators with multiple degrees of redundancy
12.Modeling and simulation of wear in revolute clearance joints in multibody systems
13.On the application of the curve curvature in path synthesis
14. Generic mobility of rigid body mechanisms
15.An eigenproblem approach to classical screw theory
16.A new trifilar pendulum approach to identify all inertia parameters of a rigid body or assembly
17.Determination of the maximal singularity-free orientation workspace for the Gough–Stewart platform
18.A model for a flywheel automatic assisted manual transmission
19.Tooth profile generation and analysis of oval gears with circular-arc teeth
20.Manipulator calibration enhancement by means of mechanical templates
Volume.44,.Issue.7.July.2009
01.Editorial Board
02.Robust mechanism synthesis with random and interval variables
03.Determination of the complete set of shaking force and shaking moment balanced planar four-bar linkages
04.A corrected equation of space curve meshing
05.An algebraic formulation of static isotropy and design of statically isotropic 6–6 Stewart platform manipulators
06.Reduction of a parallel kinematics machine tool inverse kinematics model with regard to machining behaviour
07.Singularity analysis of planar parallel manipulators based on forward kinematic solutions
08.Planning of manipulator motion trajectory with higher-degree polynomials use
09.Head-cutter for optimal tooth modifications in spiral bevel gears
10.Mechatronic design of fault detection isolation and restoration systems for rotating machineries
11.Elliptic motion on dual hyperbolic unit sphere
12.IFToMM 2011 World Congress June 19-25, 2011 UCEA-Universidad de Guanajuato, Mexico. First Announcement and Call for Papers
