LvsDR模式配置

#!/bin/bash

#lvs setting

#Dip# eth0:192.168.233.145#VIP# eth0:0192.168.233.250/32#RIP1:192.168.233.146#RIP2:192.168.233.147#VIP#192.168.233.250/32case$1inrip)

#VIP:

iptables-F

setenforce0echo1>/PRoc/sys/net/ipv4/conf/lo/arp_ignore

echo1>/proc/sys/net/ipv4/conf/all/arp_ignore

echo2>/proc/sys/net/ipv4/conf/lo/arp_announce

echo2>/proc/sys/net/ipv4/conf/all/arp_announce

ifconfig lo:0192.168.233.250netmask255.255.255.255

broadcast192.168.233.250up

route add-host192.168.233.250dev lo:0;;

dip)

#DIP:

iptables-F

setenforce0echo1>/proc/sys/net/ipv4/ip_forward

ifconfig eth0:0192.168.233.250netmask255.255.255.255

broadcast192.168.233.250up

ipvsadm-C

ipvsadm-A -t192.168.233.250:80-s wlc

ipvsadm-a -t192.168.233.250:80-r192.168.233.146-g

ipvsadm-a -t192.168.233.250:80-r192.168.233.147-g

ipvsadm-Ln

;;

esac

#End#