linux-【LAMP环境配置安装注意安装步骤】9
（一）安装gcc glibc-devel
glibc-headers
kernel-headers
libgomp
gcc-c++
libstdc++-devel
（二）安装zlib压缩库zlib-1.2.5.tar.gz
shell>cd /home/shuhua/tar
shell>tar –zxvf zlib-1.2.5.tar.gz
shell>cd zlib-1.2.5
shell>./configure //这个配置编译命令不要加目录参数
shell>make && make install
（三）安装apache shell>cd /home/shuhua/tar
shell>tar -jxvf httpd-2.2.19.tar.bz2
shell>cd httpd-2.2.19
shell>./configure --PRefix=/usr/local/http2 \
--enable-modules=all \
--enable-rewrite \
--enable-mods-shared=all \
--enable-so
shell>make && make install
#启动Apache
shell>/usr/local/http2/bin/apachectl start
#测试apache
浏览器打开: http://虚拟机ip
看到 "it works!",即为成功
配置虚拟主机
1）配置host文件
打开C:/windows/system32/drivers/etc/hosts 文件
增加域名记录
如：
192.168.1.246 www.ec1.com
192.168.1.246 www.ec2.com
2) 增加虚拟主机
vi /usr/local/http2/conf/httpd.conf
取消#Include conf/extra/httpd-vhosts.conf
这一行前面的#号
保存退出
vi /usr/local/http2/conf/extra/httpd-vhosts.conf
增加虚拟主机记录
<VirtualHost *:80>
ServerAdmin webmaster@dummy-host.example.com
DocumentRoot "/usr/local/http2/htdocs/ec1"
ServerName www.ec1.com
ServerAlias www.dummy-host.example.com
ErrorLog "logs/dummy-host.example.com-error_log"
CustomLog "logs/dummy-host.example.com-access_log" common
</VirtualHost>
<VirtualHost *:80>
ServerAdmin webmaster@dummy-host2.example.com
DocumentRoot "/usr/local/http2/htdocs/ec2"
ServerName www.ec2.com
ErrorLog "logs/dummy-host2.example.com-error_log"
CustomLog "logs/dummy-host2.example.com-access_log" common
</VirtualHost>
3)
shell> cd /usr/local/http2/htdocs
shell> mkdir ec1 ec2
shell> echo this is ec1.com > ec1/index.html
shell> echo this is ec2.com > ec2/index.html
4）重启apache
/usr/local/http2/bin/apachectl restart
5)浏览器打开www.ec1.com,和www.ec2.com
看到不同的网站内容，虚拟主机创建完毕！
安装图形库,为编译php做准备
libxml2-2.7.2.tar.gz
jpegsrc.v8b.tar.gz
libpng-1.4.3.tar.gz
freetype-2.4.1.tar.gz
gd-2.0.35.tar.gz
(四) 安装libxml2
shell>cd /home/shuhua/tar
shell>tar zxvf libxml2-2.7.2.tar.gz
shell>cd libxml2-2.7.2
shell>./configure --prefix=/usr/local/libxml2
shell>make && make install
(五) 安装jpeg8
shell>cd /home/shuhua/tar
shell>tar -zxvf jpegsrc.v8b.tar.gz
shell>cd jpeg-8b
shell>./configure --prefix=/usr/local/jpeg \
--enable-shared --enable-static
shell>make && make install
(六) 安装libpng
shell>cd /home/shuhua/tar
shell>tar zxvf libpng-1.4.3.tar.gz
shell>cd libpng-1.4.3
shell>./configure #和zlib一样不要带参数，让它默认安装到相应目录
shell>make && make install
(七) 安装freetype
shell>cd /home/shuhua/tar
shell>tar zxvf freetype-2.4.1.tar.gz
shell>cd freetype-2.4.1
shell>./configure --prefix=/usr/local/freetype
shell>make && make install
(八) 安装GD库
shell>cd /home/shuhua/tar
shell>tar -zvxf gd-2.0.35.tar.gz
shell>mkdir -p /usr/local/gd
shell>cd gd-2.0.35
shell>./configure --prefix=/usr/local/gd \
--with-jpeg=/usr/local/jpeg/ \
--with-png --with-zlib \
--with-freetype=/usr/local/freetype
shell>make && make install
(九) 安装 php5
shell>cd /home/shuhua/tar
shell>tar -jxvf php-5.3.6.tar.bz
shell>cd php-5.3.6
shell>./configure --prefix=/usr/local/php \
--with-apxs2=/usr/local/http2/bin/apxs \
--with-MySQL=mysqlnd \
--with-pdo-mysql=mysqlnd \
--with-mysqli=mysqlnd \
--with-freetype-dir=/usr/local/freetype \
--with-gd=/usr/local/gd \
--with-zlib --with-libxml-dir=/usr/local/libxml2 \
--with-jpeg-dir=/usr/local/jpeg \
--with-png-dir \
--enable-mbstring=all \
--enable-mbregex \
--enable-shared
shell>make && make install
shell>cp php.ini-development /usr/local/php/lib/php.ini
配置Apache使其支持php
vi /usr/local/http2/conf/httpd.conf
1) 在httpd.conf(Apache主配置文件)中增加：
AddTypeapplication/x-httpd-php .php
2) 找到下面这段话:
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
在index.html 前面添加index.php
3) 建立php测试网页
vi /usr/local/apache2/htdocs/index.php
输入如下内容:
<?php
phpinfo();
?>
4) 重启apache
shell> /usr/local/http2/bin/apachectl restart
5) 再次浏览器查看http://虚拟机IP
如果看到php信息,工作就完成了!
(十) 安装MySQL
1) 编译安装MySQL
shell>cd /home/shuhua/tar
shell>tar -xzvf mysql-5.1.30.tar.gz
shell>cd mysql-5.1.58
shell>./configure --prefix=/usr/local/mysql \
--with-charset=utf8 \
--with-extra-charsets=gbk,gb2312,binary
shell> mount .....挂载光盘
shell>rpm -ivh libtermcap-devel-2.0.8-46....
shell>make && make install
2)
配置并初始化MySQL
shell>groupadd mysql
shell>useradd
-g mysql mysql
shell>cp support-files/my-medium.cnf
/etc/my.cnf
shell>cd /usr/local/mysql
shell>chown -R mysql.mysql .
shell>bin/mysql_install_db --user=mysql \
--datadir=/usr/local/mysql/var
shell>chown -R root .
shell>chown -R mysql var
shell>bin/mysqld_safe --user=mysql &
3)
测试数据库
shell>
bin/mysql –uroot
mysql> show
databases;
4)
接上步,修改mysql密码(可不做此步,默认无密码)
mysql>UPDATE
user SET
passWord=PASSWORD('new_password')
WHERE
user='root';
mysql>flush
privileges;
