Win32调试API 注意内存泄漏
最近学习 Win32调试API, 写了点程序, 又学到了一些东西.
比如用 A.EXE 做 Debuger, B.EXE 做 Debuggee.
一般的教程都象下面这样写 A.EXE:
PROCESS_INFORMATION pi;
STARTUPINFO si;
DEBUG_EVENT de;
DWORD dwContinueStatus;
DWORD dwExceptionNum=0; // 异常次数
GetStartupInfo(&si);
CreateProcess("B.EXE", 0, 0, 0, 0, DEBUG_PROCESS, 0, 0, &si, &pi));
while( WaitForDebugEvent(&de, INFINITE) )
{
dwContinueStatus = DBG_EXCEPTION_NOT_HANDLED;
if (de.dwDebugEventCode == EXIT_PROCESS_DEBUG_EVENT)
{
break; // debugee 结束
}
else if (de.dwDebugEventCode == EXCEPTION_DEBUG_EVENT)
{
dwExceptionNum++; // 第一次异常需要注意
if (dwExceptionNum == 1) dwContinueStatus = DBG_CONTINUE;
}
...
ContinueDebugEvent(de.dwProcessId, de.dwThreadId, dwContinueStatus);
}
CloseHandle(pi.hThread);
CloseHandle(pi.hProcess);
上面的程序好象没问题. 但我在调试中发现, B.EXE 结束后, 只要 A.EXE 不关闭, B.EXE 就不能删除改名等,
这说明 A.EXE 中打开了 B.EXE 的文件句柄, 但一直没有关闭. 经过反复研究, 终于找到了问题所在, 改写程序如下:
while( WaitForDebugEvent(&de, INFINITE) )
{
dwContinueStatus = DBG_EXCEPTION_NOT_HANDLED;
if (de.dwDebugEventCode == EXIT_PROCESS_DEBUG_EVENT)
{
break; // debugee 结束
}
else if (de.dwDebugEventCode == CREATE_PROCESS_DEBUG_EVENT)
{
// Handle to the process’s image file
CloseHandle(de.u.CreateProcessInfo.hFile);
// Handle to the process
CloseHandle(de.u.CreateProcessInfo.hProcess);
// Handle to the initial thread of the process identified by the hProcess member
CloseHandle(de.u.CreateProcessInfo.hThread);
}
else if (de.dwDebugEventCode == CREATE_THREAD_DEBUG_EVENT)
{
// Handle to the thread whose creation caused the debugging event
CloseHandle(de.u.CreateThread.hThread);
}
else if (de.dwDebugEventCode == LOAD_DLL_DEBUG_EVENT)
{
// Handle to the loaded DLL
CloseHandle(de.u.LoadDll.hFile);
}
else if (de.dwDebugEventCode == EXCEPTION_DEBUG_EVENT)
{
dwExceptionNum++; // 第一次异常需要注意
if (dwExceptionNum == 1) dwContinueStatus = DBG_CONTINUE;
}
...
ContinueDebugEvent(de.dwProcessId, de.dwThreadId, dwContinueStatus);
}
CloseHandle(pi.hThread);
CloseHandle(pi.hProcess);
原因就在于 CREATE_PROCESS_DEBUG_EVENT, CREATE_THREAD_DEBUG_EVENT, LOAD_DLL_DEBUG_EVENT 时会打开一些句柄,
如果不使用这些句柄, 最好马上关闭.
当然 A. EXE 关闭时, 这些句柄都会自动关闭, 但有些程序, debuger 创建在 Explorer, 就会造成内存泄露.
具体细节请参考 MSDN.
