| 订阅 | 在线投稿
分享
 
 
 

[SATA] RHAS3.2下安装SATA硬盘的问题

来源:互联网网民  宽屏版  评论
2006-01-09 08:40:28

今天在redhat as 3.2下安装SATA硬盘,搞得头大了!

很奇怪,安装windows2000,可以正确的找到两个硬盘,且一点问题都没有。

安装红旗linux,也可以正确的认出它们,也没有发现什么问题。

偏偏在redhat as 3.2 下面,始终有问题。

search了整个google,也没有找到什么结果。

初步估计是内核的问题,但是同样的操作系统版本,同样的 sata 阵列卡,同样的硬盘配置,在另外一个server下面就顺利的搞定!

所以还觉得和主板芯片有点关系!

反正没有搞定!郁闷先....

dmesg:

=========================================================================================

BM-DMA at 0x1400-0x1407, BIOS settings: hde:DMA, hdf:pio

HPT372N support is EXPERIMENTAL ONLY.

ide3: BM-DMA at 0x1408-0x140f, BIOS settings: hdg:DMA, hdh:pio

SvrWks OSB4: IDE controller at PCI slot 00:0f.1

PCI: Enabling device 00:0f.1 (0000 -> 0001)

SvrWks OSB4: chipset revision 0

SvrWks OSB4: not 100% native mode: will probe irqs later

ide0: BM-DMA at 0x1840-0x1847, BIOS settings: hda:pio, hdb:pio

ide1: BM-DMA at 0x1848-0x184f, BIOS settings: hdc:pio, hdd:pio

hdc: TOSHIBA CD-ROM XM-7002Bc, ATAPI CD/DVD-ROM drive

hde: Maxtor 6Y200M0, ATA DISK drive

blk: queue c0502110, I/O limit 4095Mb (mask 0xffffffff)

hdg: Maxtor 6Y200M0, ATA DISK drive

blk: queue c05025f8, I/O limit 4095Mb (mask 0xffffffff)

ide1 at 0x170-0x177,0x376 on irq 15

ide2 at 0x1868-0x186f,0x185e on irq 24

ide3 at 0x1860-0x1867,0x185a on irq 24

hde: attached ide-disk driver.

hde: host protected area => 1

hde: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63, UDMA(33)

hdg: attached ide-disk driver.

hdg: host protected area => 1

hdg: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63, UDMA(33)

ide-floppy driver 0.99.newide

Partition check:

hde: hde1

hdg:hdg: status error: status=0x00 { }

hdg: drive not ready for command

hdg: status error: status=0x00 { }

hdg: drive not ready for command

hdg: status error: status=0x00 { }

hdg: drive not ready for command

hdg: status error: status=0x00 { }

hdg: DMA disabled

hdg: drive not ready for command

ide3: reset: master: error (0x00?)

hdg: status error: status=0x00 { }

hdg: drive not ready for command

hdg: status error: status=0x00 { }

hdg: drive not ready for command

hdg: status error: status=0x00 { }

hdg: drive not ready for command

hdg: status error: status=0x00 { }

hdg: drive not ready for command

ide3: reset: master: error (0x00?)

end_request: I/O error, dev 22:00 (hdg), sector 0

end_request: I/O error, dev 22:00 (hdg), sector 2

end_request: I/O error, dev 22:00 (hdg), sector 4

end_request: I/O error, dev 22:00 (hdg), sector 6

end_request: I/O error, dev 22:00 (hdg), sector 0

end_request: I/O error, dev 22:00 (hdg), sector 2

end_request: I/O error, dev 22:00 (hdg), sector 4

end_request: I/O error, dev 22:00 (hdg), sector 6

unable to read partition table

ide-floppy driver 0.99.newide

md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27

md: Autodetecting RAID arrays.

md: autorun ...

md: ... autorun DONE.

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

Initializing Cryptographic API

NET4: Linux TCP/IP 1.0 for NET4.0

IP: routing cache hash table of 16384 buckets, 128Kbytes

TCP: Hash tables configured (established 524288 bind 65536)

Linux IP multicast router 0.06 plus PIM-SM

Initializing IPsec netlink socket

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

RAMDISK: Compressed image found at block 0

 
免责声明:本文为网络用户发布,其观点仅代表作者个人观点,与本站无关,本站仅提供信息存储服务。文中陈述内容未经本站证实,其真实性、完整性、及时性本站不作任何保证或承诺,请读者仅作参考,并请自行核实相关内容。
 
今天在redhat as 3.2下安装SATA硬盘,搞得头大了! 很奇怪,安装windows2000,可以正确的找到两个硬盘,且一点问题都没有。 安装红旗linux,也可以正确的认出它们,也没有发现什么问题。 偏偏在redhat as 3.2 下面,始终有问题。 search了整个google,也没有找到什么结果。 初步估计是内核的问题,但是同样的操作系统版本,同样的 sata 阵列卡,同样的硬盘配置,在另外一个server下面就顺利的搞定! 所以还觉得和主板芯片有点关系! 反正没有搞定!郁闷先.... dmesg: ========================================================================================= BM-DMA at 0x1400-0x1407, BIOS settings: hde:DMA, hdf:pio HPT372N support is EXPERIMENTAL ONLY. ide3: BM-DMA at 0x1408-0x140f, BIOS settings: hdg:DMA, hdh:pio SvrWks OSB4: IDE controller at PCI slot 00:0f.1 PCI: Enabling device 00:0f.1 (0000 -> 0001) SvrWks OSB4: chipset revision 0 SvrWks OSB4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1840-0x1847, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1848-0x184f, BIOS settings: hdc:pio, hdd:pio hdc: TOSHIBA CD-ROM XM-7002Bc, ATAPI CD/DVD-ROM drive hde: Maxtor 6Y200M0, ATA DISK drive blk: queue c0502110, I/O limit 4095Mb (mask 0xffffffff) hdg: Maxtor 6Y200M0, ATA DISK drive blk: queue c05025f8, I/O limit 4095Mb (mask 0xffffffff) ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0x1868-0x186f,0x185e on irq 24 ide3 at 0x1860-0x1867,0x185a on irq 24 hde: attached ide-disk driver. hde: host protected area => 1 hde: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63, UDMA(33) hdg: attached ide-disk driver. hdg: host protected area => 1 hdg: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63, UDMA(33) ide-floppy driver 0.99.newide Partition check: hde: hde1 hdg:hdg: status error: status=0x00 { } hdg: drive not ready for command hdg: status error: status=0x00 { } hdg: drive not ready for command hdg: status error: status=0x00 { } hdg: drive not ready for command hdg: status error: status=0x00 { } hdg: DMA disabled hdg: drive not ready for command ide3: reset: master: error (0x00?) hdg: status error: status=0x00 { } hdg: drive not ready for command hdg: status error: status=0x00 { } hdg: drive not ready for command hdg: status error: status=0x00 { } hdg: drive not ready for command hdg: status error: status=0x00 { } hdg: drive not ready for command ide3: reset: master: error (0x00?) end_request: I/O error, dev 22:00 (hdg), sector 0 end_request: I/O error, dev 22:00 (hdg), sector 2 end_request: I/O error, dev 22:00 (hdg), sector 4 end_request: I/O error, dev 22:00 (hdg), sector 6 end_request: I/O error, dev 22:00 (hdg), sector 0 end_request: I/O error, dev 22:00 (hdg), sector 2 end_request: I/O error, dev 22:00 (hdg), sector 4 end_request: I/O error, dev 22:00 (hdg), sector 6 unable to read partition table ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 524288 bind 65536) Linux IP multicast router 0.06 plus PIM-SM Initializing IPsec netlink socket NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0
󰈣󰈤
 
 
 
>>返回首页<<
 
 热帖排行
 
 
静静地坐在废墟上,四周的荒凉一望无际,忽然觉得,凄凉也很美
©2005- 王朝网络 版权所有