| 订阅 | 在线投稿
分享
 
 
 

修改VMware下Ubuntu界面分辨率过高问题

来源:互联网  宽屏版  评论
2008-06-01 02:15:02

在虚拟机中安装UBuntu后,登录界面的分辨率一直过高,导致每次输入登录名和密码都要拖动,很是不方便;修改屏幕分辨率也无济于事。

后来,在/ect/X11/下,发现多了一个xorg.conf.BeforeVMwareToolsInstall文件,看来是由于安装VMwareTools修改了配置文件。于是进行对照,发现原来的

Section "Screen"

Identifier "Default Screen"

Device "VMware Inc [VMware SVGA II] PCI Display Adapter"

Monitor "Generic Monitor"

DefaultDepth 24

EndSection

被修改为:

Section "Screen"

Identifier "Default Screen"

Device "VMware SVGA"

Monitor "vmware"

# Don't specify DefaultColorDepth unless you know what you're

# doing. It will override the driver's preferences which can

# cause the X server not to run if the host doesn't support the

# depth.

Subsection "Display"

# VGA mode: better left untouched

Depth 4

Modes "640x480"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 8

Modes "1024x768"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 15

Modes "1024x768"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 16

Modes "1024x768"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 24

Modes "1024x768"

ViewPort 0 0

EndSubsection

EndSection

在Section "Screen"中多了几个子段Subsection "Display",这几个子段中列举出了几组分辨率和颜色深度,忽然明白,其实也可以自己进行修改/etc/X11/xorg.conf文件,修改方法:去掉原来的默认的颜色深度,增加几组子段Subsection "Display",在子段中,列举出相应的Modes模式(也就是分辨率),Depth颜色深度,以及ViewPort(应该是视图顶点,为0 0),需要注意的是:这几组中的分辨率应该为你要改成的分辨率,只是其颜色深度不同而已;修改完成后保存,然后重启即可。

另外,安装完VMwareTools后,鼠标的滚轮突然不能使用,原来配置文件中关于鼠标的配置也被修改:

Section "InputDevice"

Identifier "Configured Mouse"

Driver "mouse"

Option "CorePointer"

Option "Device" "/dev/input/mice"

Option "Protocol" "ps/2" #此处原来为"ImPS/2"

Option "ZAxisMapping" "4 5"

Option "Emulate3Buttons" "true"

EndSection

将"ps/2"改为"ImPS/2"保存,重启后即可。

 
在虚拟机中安装UBuntu后,登录界面的分辨率一直过高,导致每次输入登录名和密码都要拖动,很是不方便;修改屏幕分辨率也无济于事。 后来,在/ect/X11/下,发现多了一个xorg.conf.BeforeVMwareToolsInstall文件,看来是由于安装VMwareTools修改了配置文件。于是进行对照,发现原来的 Section "Screen" Identifier "Default Screen" Device "VMware Inc [VMware SVGA II] PCI Display Adapter" Monitor "Generic Monitor" DefaultDepth 24 EndSection 被修改为: Section "Screen" Identifier "Default Screen" Device "VMware SVGA" Monitor "vmware" # Don't specify DefaultColorDepth unless you know what you're # doing. It will override the driver's preferences which can # cause the X server not to run if the host doesn't support the # depth. Subsection "Display" # VGA mode: better left untouched Depth 4 Modes "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 8 Modes "1024x768" ViewPort 0 0 EndSubsection Subsection "Display" Depth 15 Modes "1024x768" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "1024x768" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1024x768" ViewPort 0 0 EndSubsection EndSection 在Section "Screen"中多了几个子段Subsection "Display",这几个子段中列举出了几组分辨率和颜色深度,忽然明白,其实也可以自己进行修改/etc/X11/xorg.conf文件,修改方法:去掉原来的默认的颜色深度,增加几组子段Subsection "Display",在子段中,列举出相应的Modes模式(也就是分辨率),Depth颜色深度,以及ViewPort(应该是视图顶点,为0 0),需要注意的是:这几组中的分辨率应该为你要改成的分辨率,只是其颜色深度不同而已;修改完成后保存,然后重启即可。 另外,安装完VMwareTools后,鼠标的滚轮突然不能使用,原来配置文件中关于鼠标的配置也被修改: Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ps/2" #此处原来为"ImPS/2" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "true" EndSection 将"ps/2"改为"ImPS/2"保存,重启后即可。
󰈣󰈤
 
 
 
>>返回首页<<
 
 热帖排行
 
 
 
静静地坐在废墟上,四周的荒凉一望无际,忽然觉得,凄凉也很美
©2005- 王朝网络 版权所有