OracleRAConSunCluster3.1（stepbystep）

王朝oracle·作者佚名 2008-05-31

宽屏版字体: 小|中|大|超大

软件要求：

Solaris9

Sun Cluster 3.1

VeritasVxVM 3.5(需要VxVM的License和Cluster Volume Manager(CVM)的License )

Oracle 9i Enterprise Edition

Sun 3310阵列驱动

硬件要求：

Sun 480 两台

Sun QFE四口网卡2块

Sun SCSI卡X6758A 2块

Sun 3310阵列 2台

一、安装硬件

二、配置阵列3310，要求如下：

要求如下：

两台都一样

c2t5d0 quorum盘 512M

c2t5d1 ora-rac-dg Log盘 256M

c2t5d2 ora-rac-dg 盘140G

c2t5d3 ora-arc-dg Log盘 256M

c2t5d4 ora-arc-dg 盘剩下的空间

c3t5d0 quorum盘 512M

c3t5d1 ora-rac-dg Log盘 256M

c3t5d2 ora-rac-dg 盘140G

c3t5d3 ora-arc-dg Log盘 256M

c3t5d4 ora-arc-dg 盘剩下的空间

三、安装操作系统

以Sun 480 36G硬盘为例，分区如下:

# format

Searching for disks...done

AVAILABLE DISK SELECTIONS:

0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107

/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w2100000c50695b66,0

1. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107

/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w2100000c50695de5,0

Specify disk (enter its number): 0

selecting c1t0d0

[disk formatted]

Warning: Current Disk has mounted partitions.

format p

partition p

Current partition table (original):

Total disk cylinders available: 24620 + 2 (reserved cylinders)

PartTagFlag Cylinders SizeBlocks

0 rootwm5808 - 13067 10.00GB(7260/0/0)20974140

1varwm 13068 - 145192.00GB(1452/0/0) 4194828

2 backupwm 0 - 24619 33.92GB(24620/0/0) 71127180

3 swapwu 0 -58078.00GB(5808/0/0)16779312

4 unassignedwm 00 (0/0/0)0

5 unassignedwm 14520 - 21779 10.00GB(7260/0/0)20974140

6 unassignedwm 21780 - 22142512.06MB(363/0/0)1048707

7 unassignedwm 00 (0/0/0)0

四、给操作系统打补丁(采用最新的补丁盘)

# cd/cdrom/eis-cd/sun/install

# ./setup-standard.sh

# cd /cdrom/eis-cd/sun/patch/9

# ../../install/bin/unpack_patches

# cd /tmp/9

# eject cdrom

# ./install_all_patches

五、安装3310的驱动和补丁

# ls

112697-04SUNWqusSUNWqusu SUNWqusuxSUNWqusx

# pkgadd -d . all

（一路yes即可）

# patchadd 112697-04

在文件/etc/kernel/sd.conf文件中加入如下几行：

name="sd" class="scsi" target=5 lun=0;

name="sd" class="scsi" target=5 lun=1;

name="sd" class="scsi" target=5 lun=2;

name="sd" class="scsi" target=5 lun=3;

name="sd" class="scsi" target=5 lun=4;

# reboot

重起后，使用format命令检查磁盘阵列的配置是否正确。

# format

Searching for disks...done

c2t5d0: configured with capacity of 510.00MB

c2t5d1: configured with capacity of 254.00MB

c2t5d2: configured with capacity of 136.71GB

c2t5d3: configured with capacity of 254.00MB

c2t5d4: configured with capacity of 66.62GB

c3t5d0: configured with capacity of 510.00MB

c3t5d1: configured with capacity of 254.00MB

c3t5d2: configured with capacity of 136.71GB

c3t5d3: configured with capacity of 254.00MB

c3t5d4: configured with capacity of 66.62GB

AVAILABLE DISK SELECTIONS:

0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107

/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w2100000c5069619e,0

1. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107

/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w2100000c50695ef2,0

2. c2t5d0 <SUN-StorEdge3310-0325 cyl 510 alt 2 hd 64 sec 32

/pci@8,700000/pci@3/scsi@4/sd@5,0

3. c2t5d1 <SUN-StorEdge3310-0325 cyl 254 alt 2 hd 64 sec 32

/pci@8,700000/pci@3/scsi@4/sd@5,1

4. c2t5d2 <SUN-StorEdge3310-0325 cyl 35273 alt 2 hd 127 sec 64

/pci@8,700000/pci@3/scsi@4/sd@5,2

5. c2t5d3 <SUN-StorEdge3310-0325 cyl 254 alt 2 hd 64 sec 32

/pci@8,700000/pci@3/scsi@4/sd@5,3

6. c2t5d4 <SUN-StorEdge3310-0325 cyl 34112 alt 2 hd 64 sec 64

/pci@8,700000/pci@3/scsi@4/sd@5,4

7. c3t5d0 <SUN-StorEdge3310-0325 cyl 510 alt 2 hd 64 sec 32

/pci@8,700000/pci@3/scsi@5/sd@5,0

8. c3t5d1 <SUN-StorEdge3310-0325 cyl 254 alt 2 hd 64 sec 32

/pci@8,700000/pci@3/scsi@5/sd@5,1

9. c3t5d2 <SUN-StorEdge3310-0325 cyl 35273 alt 2 hd 127 sec 64

/pci@8,700000/pci@3/scsi@5/sd@5,2

10. c3t5d3 <SUN-StorEdge3310-0325 cyl 254 alt 2 hd 64 sec 32

/pci@8,700000/pci@3/scsi@5/sd@5,3

11. c3t5d4 <SUN-StorEdge3310-0325 cyl 34112 alt 2 hd 64 sec 64

/pci@8,700000/pci@3/scsi@5/sd@5,4

Specify disk (enter its number): 0

selecting c1t0d0

[disk formatted]

Warning: Current Disk has mounted partitions.

format q

六、配置/etc/hosts文件和/.profile文件

rac1:

root@rac1 # cat /etc/hosts

# Internet host table

127.0.0.1 localhost

192.168.0.201 rac1loGhost a.b

192.168.0.202 rac2

在/.profile文件中加入以下内容：

PATH=$PATH:/usr/cluster/bin:/etc/vx/bin

eXPort PATH

MANPATH=$MANPATH:/usr/cluster/man:/usr/share/man:/opt/VRTS/man

export MANPATH

rac2:

root@rac2 # cat /etc/hosts

# Internet host table

127.0.0.1 localhost

192.168.0.202 rac2loghost a.b

192.168.0.201 rac1

在/.profile文件中加入以下内容：

PATH=$PATH:/usr/cluster/bin:/etc/vx/bin

export PATH

MANPATH=$MANPATH:/usr/cluster/man:/usr/share/man:/opt/VRTS/man

export MANPATH

七、安装Sun Cluster 3.1，并打Sun Cluster 3.1的补丁

建立主节点：

# cd/opt/suncluster_3_1/SunCluster_3.1/Sol_9/Tools

# ./scinstall

*** Main Menu ***

Please select from one of the following (*) options:

* 1) Establish a new cluster using this machine as the first node

* 2) Add this machine as a node in an established cluster

3) Configure a cluster to be JumpStarted from this install server

4) Add support for new data services to this cluster node

5) Print release information for this cluster node

* ?) Help with menu options

* q) Quit

Option:1

*** Establishing a New Cluster ***

This option is used to establish a new cluster using this machine as the first node in that cluster.

Once the cluster framework software is installed, you will be asked for the name of the cluster. Then, sccheck(1M) is run to test this machine for basic Sun Cluster pre-configuration requirements.

After sccheck(1M) passes, you will be a