王朝网络
分享
 
 
 

配置openvpn

王朝other·作者佚名  2008-05-18
宽屏版  字体: |||超大  

一、安装与配置

1、软件下载

可以从“http://openvpn.net/”获得最新的软件

2、软件安装

tar xzvf openvpn-2.0.7.tar.gz

cd openvpn-2.0

./configure

make

make install

mknod /dev/net/tun c 10 200 #创建一个tun设备

echo "alias char-major-10-200 tun" >>/etc/modprobe.conf

3、初始化设置

mkdir /etc/openvpn #创建openvpn目录

cp -r easy-rsa /etc/openvpn #切换到OpenVPN源代码目录执行

cd /etc/openvpn/easy-rsa

vi vars #修改vars文件,如下:

# These are the default values for fields

# which will be placed in the certificate.

# Don't leave any of these fields blank.

export KEY_COUNTRY=cn

#国家

export KEY_PROVINCE=Beijing

#所属省

export KEY_CITY=Beijing

#所在城市

export KEY_ORG="test"

#所属组织,CA证书也会根据这个生成

export KEY_EMAIL="…@...com"

修改后保存,下面我们开始什成keys

#. vars #使修改的变量生效

NOTE: when you run ./clean-all, I will be doing a rm -rf on /etc/openvpn/easy-rsa/keys

#./clean-all #初始化keys目录,创建所需要的文件和目录

#./build-ca #什成Root CA证书,用于签发Server和Client证书,请保护好keys/ca.key文件

# ls keys

ca.crt ca.key index.txt serial

我们可以看到ca.crt ca.key文件已经什成了

下面我们为服务器生成 Diffie-Hellman 文件

# ./build-dh #TLS server 需要使用的一个文件

创建并签发VPN Server使用的CA

# ./build-key-server server # server 为创建后的文件名,分别为server.crt server.key

接下来为VPN Client颁发CA证书,如果以后要为其他Client颁发证书,直接使用build-key命令签发新证书。

# ./build-key client

为防止恶意攻击(如DOS、UDP port flooding),我们生成一个"HMAC firewall"

#openvpn --genkey --secret keys/ta.key

生成证书吊销链文件,防止日后有人丢失证书,被非法用户接入VPN

#./make-crl vpncrl.pem

4、服务器点设置

Server使用的配置文件server.conf,如下:

# Which local IP address should OpenVPN

# listen on? (optional)

;local a.b.c.d

;local *.*.*.*

# Which TCP/UDP port should OpenVPN listen on?

# If you want to run multiple OpenVPN instances

# on the same machine, use a different port

# number for each one. You will need to

# open up this port on your firewall.

port 5000

# TCP or UDP server?

;proto tcp

proto udp

# "dev tun" will create a routed IP tunnel,

# "dev tap" will create an ethernet tunnel.

# Use "dev tap0" if you are ethernet bridging

# and have precreated a tap0 virtual interface

# and bridged it with your ethernet interface.

# If you want to control access policies

# over the VPN, you must create firewall

# rules for the the TUN/TAP interface.

# On non-Windows systems, you can give

# an explicit unit number, such as tun0.

# On Windows, use "dev-node" for this.

# On most systems, the VPN will not function

# unless you partially or fully disable

# the firewall for the TUN/TAP interface.

;dev tap

dev tun

# Windows needs the TAP-Win32 adapter name

# from the Network Connections panel if you

# have more than one. On XP SP2 or higher,

# you may need to selectively disable the

# Windows firewall for the TAP adapter.

# Non-Windows systems usually don't need this.

;dev-node MyTap

# SSL/TLS root certificate (ca), certificate

# (cert), and private key (key). Each client

# and the server must have their own cert and

# key file. The server and all clients will

# use the same ca file.

#

# See the "easy-rsa" directory for a series

# of scripts for generating RSA certificates

# and private keys. Remember to use

# a unique Common Name for the server

# and each of the client certificates.

#

# Any X509 key management system can be used.

# OpenVPN can also use a PKCS #12 formatted key file

# (see "pkcs12" directive in man page).

ca ca.crt

cert server.crt

key server.key # This file should be kept secret

# Diffie hellman parameters.

# Generate your own with:

# openssl dhparam -out dh1024.pem 1024

# Substitute 2048 for 1024 if you are using

# 2048 bit keys.

dh dh1024.pem

# Configure server mode and supply a VPN subnet

# for OpenVPN to draw client addresses from.

# The server will take 10.8.0.1 for itself,

# the rest will be made available to clients.

# Each client will be able to reach the server

# on 10.8.0.1. Comment this line out if you are

# ethernet bridging. See the man page for more info.

server 10.8.0.0 255.255.255.0

# Maintain a record of client <-> virtual IP address

# associations in this file. If OpenVPN goes down or

# is restarted, reconnecting clients can be assigned

# the same virtual IP address from the pool that was

# previously assigned.

ifconfig-pool-persist ipp.txt

# Configure server mode for ethernet bridging.

# You must first use your OS's bridging capability

# to bridge the TAP interface with the ethernet

# NIC interface. Then you must manually set the

# IP/netmask on the bridge interface, here we

# assume 10.8.0.4/255.255.255.0. Finally we

# must set aside an IP range in this subnet

# (start=10.8.0.50 end=10.8.0.100) to allocate

# to connecting clients. Leave this line commented

# out unless you are ethernet bridging.

;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100

# Push routes to the client to allow it

# to reach other private subnets behind

# the server. Remember that these

# private subnets will also need

# to know to route the OpenVPN client

# address pool (10.8.0.0/255.255.255.0)

# back to the OpenVPN server.

#push "route 192.168.1.0 255.255.255.0"

push "route 192.168.2.0 255.255.255.0"

push "route 10.1.1.0 255.255.255.0"

route 10.3.0.0 255.255.0.0

# To assign specific IP addresses to specific

# clients or if a connecting client has a private

# subnet behind it that should also have VPN access,

# use the subdirectory "ccd" for client-specific

# configuration files (see man page for more info).

# EXAMPLE: Suppose the client

# having the certificate common name "Thelonious"

# also has a small subnet behind his connecting

# machine, such as 192.168.40.128/255.255.255.248.

# First, uncomment out these lines:

;client-config-dir ccd

;route 192.168.40.128 255.255.255.248

# Then create a file ccd/Thelonious with this line:

# iroute 192.168.40.128 255.255.255.248

# This will allow Thelonious' private subnet to

# access the VPN. This example will only work

# if you are routing, not bridging, i.e. you are

# using "dev tun" and "server" directives.

# EXAMPLE: Suppose you want to give

# Thelonious a fixed VPN IP address of 10.9.0.1.

# First uncomment out these lines:

;client-config-dir ccd

;route 10.9.0.0 255.255.255.252

# Then add this line to ccd/Thelonious:

# ifconfig-push 10.9.0.1 10.9.0.2

# Suppose that you want to enable different

# firewall access policies for different groups

# of clients. There are two methods:

# (1) Run multiple OpenVPN daemons, one for each

# group, and firewall the TUN/TAP interface

# for each group/daemon appropriately.

# (2) (Advanced) Create a script to dynamically

# modify the firewall in response to access

# from different clients. See man

# page for more info on learn-address script.

;learn-address ./script

# If enabled, this directive will configure

# all clients to redirect their default

# network gateway through the VPN, causing

# all IP traffic such as web browsing and

# and DNS lookups to go through the VPN

# (The OpenVPN server machine may need to NAT

# the TUN/TAP interface to the internet in

# order for this to work properly).

# CAVEAT: May break client's network config if

# client's local DHCP server packets get routed

# through the tunnel. Solution: make sure

# client's local DHCP server is reachable via

# a more specific route than the default route

# of 0.0.0.0/0.0.0.0.

;push "redirect-gateway"

# Certain Windows-specific network settings

# can be pushed to clients, such as DNS

# or WINS server addresses. CAVEAT:

# http://openvpn.net/faq.html#dhcpcaveats

push "dhcp-option DNS 192.168.2.10"

;push "dhcp-option WINS 10.8.0.1"

# Uncomment this directive to allow different

# clients to be able to "see" each other.

# By default, clients will only see the server.

# To force clients to only see the server, you

# will also need to appropriately firewall the

# server's TUN/TAP interface.

;client-to-client

# Uncomment this directive if multiple clients

# might connect with the same certificate/key

# files or common names. This is recommended

# only for testing purposes. For production use,

# each client should have its own certificate/key

# pair.

#

# IF YOU HAVE NOT GENERATED INDIVIDUAL

# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,

# EACH HAVING ITS OWN UNIQUE "COMMON NAME",

# UNCOMMENT THIS LINE OUT.

;duplicate-cn

# The keepalive directive causes ping-like

# messages to be sent back and forth over

# the link so that each side knows when

# the other side has gone down.

# Ping every 10 seconds, assume that remote

# peer is down if no ping received during

# a 120 second time period.

keepalive 10 120

# For extra security beyond that provided

# by SSL/TLS, create an "HMAC firewall"

# to help block DoS attacks and UDP port flooding.

#

# Generate with:

# openvpn --genkey --secret ta.key

#

# The server and each client must have

# a copy of this key.

# The second parameter should be '0'

# on the server and '1' on the clients.

tls-auth ta.key 0 # This file is secret

# Select a cryptographic cipher.

# This config item must be copied to

# the client config file as well.

;cipher BF-CBC # Blowfish (default)

;cipher AES-128-CBC # AES

;cipher DES-EDE3-CBC # Triple-DES

# Enable compression on the VPN link.

# If you enable it here, you must also

# enable it in the client config file.

;comp-lzo

# The maximum number of concurrently connected

# clients we want to allow.

;max-clients 100

# It's a good idea to reduce the OpenVPN

# daemon's privileges after initialization.

#

# You can uncomment this out on

# non-Windows systems.

user nobody

group nobody

# The persist options will try to avoid

# accessing certain resources on restart

# that may no longer be accessible because

# of the privilege downgrade.

persist-key

persist-tun

# Output a short status file showing

# current connections, truncated

# and rewritten every minute.

status openvpn-status.log

# By default, log messages will go to the syslog (or

# on Windows, if running as a service, they will go to

# the "\Program Files\OpenVPN\log" directory).

# Use log or log-append to override this default.

# "log" will truncate the log file on OpenVPN startup,

# while "log-append" will append to it. Use one

# or the other (but not both).

;log openvpn.log

;log-append openvpn.log

# Set the appropriate level of log

# file verbosity.

#

# 0 is silent, except for fatal errors

# 4 is reasonable for general usage

# 5 and 6 can help to debug connection problems

# 9 is extremely verbose

verb 9

# Silence repeating messages. At most 20

# sequential messages of the same message

# category will be output to the log.

;mute 20

把server.conf文件保存到/etc/opennvpn目录中,并把使用easy-rsa下的脚本什成的key都复制到/etc/openvpn目录下,命令如下:

#cd /etc/openvpn

#cp easy-rsa/keys/ca.crt .

#cp easy-rsa/keys/server.crt .

#cp easy-rsa/keys/server.key .

#cp easy-rsa/keys/dh1024.pem .

#cp easy-rsa/keys/ta.key .

#cp easy-rsa/keys/vpncrl.pem .

创建OpenVPN启动脚本,可以在源代码目录中找到,在sample-scripts目录下的openvpn.init文件,将其复制到/etc/init.d/目录中,改名为openvpn

然后运行:

#chkconfig --add openvpn

#chkconfig openvpn on

立即启动openenvpn

#/etc/init.d/openvpn start

5、客户端配置

配置客户端的配置文件client.ovpn,如下:

##############################################

# Sample client-side OpenVPN 2.0 config file #

# for connecting to multi-client server. #

# #

# This configuration can be used by multiple #

# clients, however each client should have #

# its own cert and key files. #

# #

# On Windows, you might want to rename this #

# file so it has a .ovpn extension #

##############################################

# Specify that we are a client and that we

# will be pulling certain config file directives

# from the server.

client

# Use the same setting as you are using on

# the server.

# On most systems, the VPN will not function

# unless you partially or fully disable

# the firewall for the TUN/TAP interface.

;dev tap

dev tun

# Windows needs the TAP-Win32 adapter name

# from the Network Connections panel

# if you have more than one. On XP SP2,

# you may need to disable the firewall

# for the TAP adapter.

#dev-node MyTap

# Are we connecting to a TCP or

# UDP server? Use the same setting as

# on the server.

;proto tcp

proto udp

# The hostname/IP and port of the server.

# You can have multiple remote entries

# to load balance between the servers.

remote …..168

remote …….35

port 5000

;remote my-server-2 1194

# Choose a random host from the remote

# list for load-balancing. Otherwise

# try hosts in the order specified.

remote-random

# Keep trying indefinitely to resolve the

# host name of the OpenVPN server. Very useful

# on machines which are not permanently connected

# to the internet such as laptops.

resolv-retry infinite

# Most clients don't need to bind to

# a specific local port number.

nobind

# Downgrade privileges after initialization (non-Windows only)

;user nobody

;group nobody

# Try to preserve some state across restarts.

persist-key

persist-tun

# If you are connecting through an

# HTTP proxy to reach the actual OpenVPN

# server, put the proxy server/IP and

# port number here. See the man page

# if your proxy server requires

# authentication.

;http-proxy-retry # retry on connection failures

;http-proxy [proxy server] [proxy port #]

# Wireless networks often produce a lot

# of duplicate packets. Set this flag

# to silence duplicate packet warnings.

;mute-replay-warnings

# SSL/TLS parms.

# See the server config file for more

# description. It's best to use

# a separate .crt/.key file pair

# for each client. A single ca

# file can be used for all clients.

ca ca.crt

cert client.crt

key client.key

# Verify server certificate by checking

# that the certicate has the nsCertType

# field set to "server". This is an

# important precaution to protect against

# a potential attack discussed here:

# http://openvpn.net/howto.html#mitm

#

# To use this feature, you will need to generate

# your server certificates with the nsCertType

# field set to "server". The build-key-server

# script in the easy-rsa folder will do this.

ns-cert-type server

# If a tls-auth key is used on the server

# then every client must also have the key.

tls-auth ta.key 1

# Select a cryptographic cipher.

# If the cipher option is used on the server

# then you must also specify it here.

;cipher x

# Enable compression on the VPN link.

# Don't enable this unless it is also

# enabled in the server config file.

;comp-lzo

# Set log file verbosity.

verb 3

# Silence repeating messages

;mute 20

只要把client.ovpn ca.crt client.crt client.key ta.key文件拷贝到C:\Program Files\openvpn\config目录下,“start OpenVpn on this config file”

 
 
 
免责声明:本文为网络用户发布,其观点仅代表作者个人观点,与本站无关,本站仅提供信息存储服务。文中陈述内容未经本站证实,其真实性、完整性、及时性本站不作任何保证或承诺,请读者仅作参考,并请自行核实相关内容。
2023年上半年GDP全球前十五强
 百态   2023-10-24
美众议院议长启动对拜登的弹劾调查
 百态   2023-09-13
上海、济南、武汉等多地出现不明坠落物
 探索   2023-09-06
印度或要将国名改为“巴拉特”
 百态   2023-09-06
男子为女友送行,买票不登机被捕
 百态   2023-08-20
手机地震预警功能怎么开?
 干货   2023-08-06
女子4年卖2套房花700多万做美容:不但没变美脸,面部还出现变形
 百态   2023-08-04
住户一楼被水淹 还冲来8头猪
 百态   2023-07-31
女子体内爬出大量瓜子状活虫
 百态   2023-07-25
地球连续35年收到神秘规律性信号,网友:不要回答!
 探索   2023-07-21
全球镓价格本周大涨27%
 探索   2023-07-09
钱都流向了那些不缺钱的人,苦都留给了能吃苦的人
 探索   2023-07-02
倩女手游刀客魅者强控制(强混乱强眩晕强睡眠)和对应控制抗性的关系
 百态   2020-08-20
美国5月9日最新疫情:美国确诊人数突破131万
 百态   2020-05-09
荷兰政府宣布将集体辞职
 干货   2020-04-30
倩女幽魂手游师徒任务情义春秋猜成语答案逍遥观:鹏程万里
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案神机营:射石饮羽
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案昆仑山:拔刀相助
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案天工阁:鬼斧神工
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案丝路古道:单枪匹马
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案镇郊荒野:与虎谋皮
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案镇郊荒野:李代桃僵
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案镇郊荒野:指鹿为马
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案金陵:小鸟依人
 干货   2019-11-12
倩女幽魂手游师徒任务情义春秋猜成语答案金陵:千金买邻
 干货   2019-11-12
 
>>返回首页<<
推荐阅读
 
 
频道精选
 
静静地坐在废墟上,四周的荒凉一望无际,忽然觉得,凄凉也很美
© 2005- 王朝网络 版权所有